Bio fermenter ,Fermenters for dairy, beverage, bio pharmaceutical, medicine, fine chemical Manufacturers & Exporters

  Fermenters Stainless steel SUS316L/SUS304

• Fermenters Jacket temperature control, optimized diversion design;
• Interior surface polishing, Ra ≤0.4um; exterior surface polishing or sandblasting;
• Fermenters Wide visual angle long-bar sight glass, pH electrode, DO electrode, temperature electrode with complete connections;
• The Fermenters tank cover is equipped with the flame inoculation port and standby feeding port.
• Sterilizing mode
• SIP, manual control

Bio Fermenter  - Optimally available

• SIP, safe and reliable;
• Without driving leakage risk;
• Wide visual angle vertical sight glass with clear observation;
• Various reliable inoculation modes (standard configuration flame inoculation port, differential pressure inoculation port, and other various optional forms);
• Floor type tank with beautiful appearance;
• Easy operation, assembly, and disassembly;
• Products of special specifications can be made to order.

The bio fermenter application and used for dairy, beverage, biopharmaceutical, medicine, fine chemical industry, laboratory, pilot test etc

 

Model	SHREE BHAGWATI -Bio fermenter ,Fermenters for dairy, beverage, bio pharmaceutical, medicine, fine chemical
Working volume	up to 20000 Ltr Bio fermenter ,Fermenters for dairy, beverage, bio pharmaceutical, medicine, fine chemical
Filling volume	65-80%
Material	Wetted parts are SS316L, and others is SS304.
Surface finish	inside surface is 0.28-0.4μm by mechanical polishing, ( passivation or electro-polish are optional )  outside surface is 0.4-0.8μm by satin finish.
Pressure	Working pressure inside vessel:0.2mpa  Design pressure inside vessel: 0.25mpa  Working pressure inside jacket:0.3mpa  Design pressure inside jacket: 0.35mpa  Pressure can be also designed according to client's detail requirement.
Agitation	1.Fermentor use SEW decelerator  2.top mechanical agitator with two layer six blade impeller, one layer defoamer and four baffles.  3.mechanical seal (single or double mechanical seal)  4.speed range: 50-400rpm (it depends on the size of the vessel)
Equips of vessel	1.using alcohol flame inoculation  2.sterile sampling vale and bottom valve  3.PH, DO, temp. sensor on lower side, side glass, top with foam and level probe, and 12v sight glass with lamp, etc.
Construction	Floor-type  One fermentor vessel with one control system (Siemens PLC and HMI)
Operating panel	Chinese and English version
Main components and controls of system
PH	1.On-line check and measure, and digitization fully automatic control;  2.PH, acid and base gang control. Peristaltic pump automatically adjust to feed acid and base;  3.Control range 2-12pH, measure precision±0.01 pH, control precision±0.1 pH;  4.It has auto alarm function.  5.pH sensor and signal transmission line, Mettler toledo
DO	1.On-line check and measure, cascade with rpm; digital display.  2.Range 0-100% or 0-200%, precision ±1%;  3.It has auto alarm function;  4.DO sensor and signal transmission line, Mettler toledo
Foam control	1.Automatically control and automatically alarm;  2. Stainless steel electrode check, peristaltic pump automatically add defoamer.
Feed control	1. Automatically control and automatically alarm;  2.Stainless steel electrode check, peristaltic pump automatically feeding
Temp. control	1.PID fully digitization signal processing, digitization control settings  2.Circulating water automatically control temperature  3.Measure range 0-150°C, control range 15-45°C,control precision±0.2°C  4.Pt 100Ωtemp. Sensor  5.System with electrical heater to control the temp inside vessel  6.Water pump circulation  7.Solenoid valve to control
Rotate speed	1. Automatically control , with auto alarm function  2. Siemens frequency converter to adjust the speed.
Pressure	1 Manually adjusting with pressure gauge and manual valve (standard system)  2. Automatically adjusting with pressure transmitter and PID valve and pneumatic valves (optional)
Air flow	1.Manually adjusting with rotor meter and manual valve (standard system)  2.Automatically adjusting with mass-flow meter and pneumatic valves (optional)  3.Air in filter , tail gas filter , with PALL cartridge, precision 0.2μm
Sterilization	1.it can be SIP by connecting with steam  2.Manually control with manual valve (standard one)  3.Automatic control with pneumatic valves (optional)
Control	Siemens PLC, and Siemens 10.4" LCD touch screen(HMI) and RITAI program
PC	1.PC with Kingview software for recording function (optional)  2.PC with Siemens remote control and Kingview recording function (optional)  3.printer (optional)